Power Calibration with Power Sensors
LadyBug Technologies‘ line of power sensors is now supported in Copper Mountain Technologies S2VNA software. Starting with S2VNA SW v.20.3.1 LadyBug power sensors LB4xx, LB5xx, and LB59xx can be used for power calibration.
LadyBug True RMS Average Power Sensors deliver reliable, accurate power measurements for CW, Pulse, and modulated signals. These diode based sensors feature a wide dynamic range and a great VSWR. The optional external triggering input feature can be used without any external components. Recorder and Trigger outputs are also available. LadyBug’s patented NoZero NoCal technology makes these sensors ideal for calibration systems, automated test stations and other embedded applications. The video below demonstrates how you can use LadyBug Power Sensors to perform power calibration using a CMT network analyzer.
LadyBug Power Sensors:
Copper Mountain Technologies’ VNAs compatible with LadyBug Technologies’ Power Sensors:
TR1300/1 2-Port 1.3 GHz Analyzer
300 kHz – 1.3 GHz
M5045 2-Port 4.5 GHz Analyzer
300 kHz – 4.5 GHz
M5065 2-Port 6.5 GHz Analyzer
300 kHz – 6.5 GHz
M5090 2-Port 8.5 GHz Analyzer
300 kHz – 8.5 GHz
M5180 2-Port 18 GHz Analyzer
300 kHz – 18 GHz
S5045 2-Port 4.5 GHz Analyzer
9 kHz – 4.5 GHz
S5065 2-Port 6.5 GHz Analyzer
9 kHz – 6.5 GHz
S5085 2-Port 8.5 GHz Analyzer
9 kHz – 8.5 GHz
S5180 2-Port 18 GHz Analyzer
100 kHz – 18 GHz
SC5065 2-Port 6.5 GHz Analyzer
300 kHz – 6.5 GHz
SC5090 2-Port 9 GHz Analyzer
300 kHz – 9 GHz
S7530 2-Port 75 Ohm 3.0 GHz Analyzer
200020 kHz – 3 GHz
C1209 2-Port 9 GHz Analyzer
100 kHz – 9 GHz
C2209 2-Port 9 GHz Analyzer, Direct Receiver Access
100 kHz – 9 GHz
C4209 2-Port 9 GHz Analyzer, Frequency Extension Compatible
100 kHz – 9 GHz
C1220 2-Port 20 GHz Analyzer
100 kHz – 20 GHz
C2220 2-Port 20 GHz Analyzer, Direct Receiver Access
100 kHz – 20 GHz
C4220 2-Port 20 GHz Analyzer, Frequency Extension Compatible
100 kHz – 20 GHz